Jump to content

Ford Toploader transmission

From Wikipedia, the free encyclopedia
Toploader Transmission
Overview
Type3 or 4-speed manual
ManufacturerFord Motor Company
Also calledFord Design 4-Speed
3.03
Top Loader
Production1964–1973
Chronology
PredecessorBorg-Warner T-10
Dagenham 4-speed

A Toploader transmission is a manually shifted gearbox design built in three-speed and four-speed configurations, introduced in 1963 by the Ford Motor Company to replace the BorgWarner T-10. It was used in most Fords and Mercurys from 1964 until 1973, as well as in some foreign models, and is officially designated the 3.03 three speed or Ford design four speed. The designation 3.03 is the centerline distance between counter shaft and mainshaft. The Toploader got its name from the fact that the access plate to the inner workings was located on the top of the main case, as opposed to side access on most gearboxes it would be compared with, such as the Ford Dagenham or GM's Saginaw or Muncie. Distinguishing the three speed from the four is as simple as counting the fasteners on the top plate: the four speed has ten fasteners; the three, nine. Both the three and four speed top loader gearboxes were designed to function in constant mesh, due to synchronizer sleeves being used instead of sliding gears, and be fully synchronized, with the exception of reverse. Forward gears are helical-type, while reverse gear and the exterior of the first and second synchronizers sleeve are spur-type gears. This transmission is also known as the Tremec T-170, HEH, or RUG depending on the year(s) of production.[1] At some point in the early 1970s production of this transmission was moved to Mexico, and the name was changed to Tremec.

Applications

[edit]

Renowned for high-performance strength and durability, the Toploader (particularly the four-speed) equipped such sought after "A-list" cars as the Mustang, Talladega, AC Cobra, AC Frua and Sunbeam Tiger as well as the Ford Fairlane, Falcon, Galaxie, Ranchero, Torino, Bronco and the Mercury Comet, Caliente, Cyclone, (Mercury Cougar 1967 1973) and Marauder. Overall, the Toploader was used in 133 different models, and was used extensively in racing as well. The 3 speed 3.03 was also the heavy duty transmission in 1960s Oldsmobile, Buick and Pontiac cars, with FOMOCO cast into the right side of the case; sourcing parts from competitors was common practice in those days, as Lincoln used GM's Hydra-Matic transmission for years in the early 1950s. The Jeep T150 transmission is a Toploader with the addition of a cast top cover and a floor ("cane") shifter.

Specifications

[edit]
Top and side view, with Hurst shifter.

The Toploader comprises two components: the main case, which encloses the gears, input and counter shaft, and the tailhousing, which encloses the speedometer gear and output shaft. The main case measures 10" in length, while the tailhousing measures 14", 15 12" or 17", depending on the application.

Shifter bosses are cast into the tailhousing along various points depending on the location of the shifter, as required for each model. Generally Falcons and Comets have shifters mounted forward along the housing, Mustangs rearward, and Fairlanes and full size Fords somewhere in between. Toploaders were also designed for two specific applications: small blocks like the Ford Windsor engine, and big blocks like the Ford FE engine and Ford 385 engine series. Some big blocks required a larger "input shaft" to withstand the torque.

Toploader 4 speed

Application Engine used (cid) Toploader Length Input shaft OD Splines, input Splines, output
Cougar 289, 302, 351 26" 1 116" 10 28
Falcon, Comet 170, 200, 260, 289 26" 1 116" 10 28
Fairlane 1964-65 170, 200, 260, 289 25 12" 1 116" 10 28
Fairlane 1967-68 200, 289, 390 26" 1 116" 10 28
Maverick 200, 250, 302 26" 1 116" 10 28
Mustang 1964-73 170, 200, 289 26" 1 116" 10 28
Ranchero 1967-68 200, 289, 390 26" 1 116" 10 28
Tiger, TVR 260, 289 27 12" 1 116" 10 28
Fords, Mercurys 200, 289, 390 29" 1 116" 10 28
Ranchero 1969 up 302,351C, 428, 429 29" 1 38" 10 31
Fords, Mercurys 428, 429, Boss 29" 1 38" 10 31
Mustang 1968 up 427, 428, Boss 26" 1 38" 10 31
Cobra 1965 up 427, 428

Note: 1964 and early 1965 Toploaders came with 25-spline output shafts which subsequently proved to be defective and were quickly replaced.

Gear Ratios

[edit]

Toploader 3 speed - Close[2]

1st 2nd 3rd
Ratio 2.42 1.61 1.00

Toploader 3 speed - Wide

1st 2nd 3rd
Ratio 2.99 1.75 1.00

Toploader 4 speed - Close

1st 2nd 3rd 4th
Ratio 2.32 1.69 1.29 1.00
Tooth Count 32 28 25 23
Counter Gear Tooth Count 15 18 21 25

Toploader 4 speed - Wide

1st 2nd 3rd 4th
Ratio 2.78 1.93 1.36 1.00
Tooth Count 32 31 25 23
Counter Gear Tooth Count 15 21 24 30

Note: Gear ratio is determined by tooth count on second gear. Close ratio has 28 teeth, wide has 31.

References

[edit]
  1. ^ O'Clair, Jim (February 2007). "Ford Toploader Four-speed Transmission". Hemmings Motor News. Retrieved 2010-01-02.
  2. ^ "Ford final drive ratios". Gear Vendors. Retrieved 2021-06-15.
[edit]